Product Description
Bleached flatback paper coated on both sides with a high shear resistant natural rubber/resin adhesive. The tape is wound with a white siliconized, crepe paper release liner on a 3” neutral core. Its good adhesion and strong shear characteristics make it suitable for high stress applications. Its great adhesive strength (equal on both sides) bonds to most surfaces.
APPLICATIONS:
- Primarily used in the manufacturing of golf clubs and repairing/replacing golf club grips.
- Commonly used in the printing industry, textile manufacturing (twisting/spinning process), steel rule diemakers/diecutters (makeready), and carpet installation.
- Suitable for bonding, mounting, holding, joining, core start-ups and splicing applications.
PHYSICAL PROPERTIES:
|
Backing |
Off-White/Natural Flatback Paper |
|
Adhesive |
Natural Rubber/Resin |
|
Total Thickness (excludes liner) |
7.0 mils (0.178 mm) |
|
Liner |
5.0 mils (0.126 mm) White Crepe Paper |
|
Adhesion to Steel |
52 oz/inch |
|
Quick Stick to Steel |
20 oz/inch |
|
Tensile Strength |
34 lbs/inch |
|
Elongation |
3% |
|
Application Temperature |
50°F to 110°F |
|
Temperature Resistance |
32°F to 200°F |
|
Specification |
Meets CID AA-180C, Type II; UU-T-91E |
Alternative to IPG #591; Tesa #4903; Shurtape #GG-200 & #dF-63; Cantech #406-00.
NOTE: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
Specifications
- Weight: 24 lb
