Product Description
High quality Polyethylene-coated cloth duct tape with natural rubber with synthetic adhesive.
A 63 mesh, high quality polyethylene-coated cloth, coated with a natural rubber based adhesive, and wound on a 3” neutral core. The film is printed with a black/yellow stripe pattern used as a permanent or temporary zone/aisle marking of hazardous areas or as differentiate work zones (warehouses, stores, office buildings, etc.).
FEATURES/BENEFITS:
- Easy to apply – the tape is hand-tearable (no cutting tools required), tears evenly across web and adheres to a variety of substrates
- Peels off easily upon removal, leaving no residue (on most surfaces).
- Excellent water and abrasion resistance.
- Conforms well to irregular surfaces, and will not twist or curl during application.
APPLICATIONS:
- Marking of dangerous areas, work zones, or stairs.
- Highlight “caution” for tripping hazards (wires, cords, beams, etc.).
- Ideal for use in manufacturing, convention/exhibition halls and residential/commercial sites.
- Floor/aisle marking tape to differentiate work zones (warehouse, stores, offices, etc.).
PHYSICAL PROPERTIES:
|
Backing |
63 mesh Polyethylene-Coated Cloth |
|
Adhesive |
Natural Rubber |
|
Total Thickness |
11.8 mils (0.30mm) |
|
Peel Adhesion |
35.8 oz/inch |
|
Tensile Strength |
29.5 lbs/inch |
|
Application Temperature |
40°F to 95°F |
|
Temperature Resistance |
-31°F to 176°F |
|
Available Color (1) |
Black/Yellow Stripes |
NOTE: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
Specifications
- Weight: 48 lb
