Product Description
Polyethylene Film Tape 7.0 Mil is a 7.0 mil low density polyethylene film tape coated on one side with a synthetic rubber based adhesive.
FEATURES/BENEFITS:
Its adhesive system remains permanently tacky and bonds well to most surfaces over a wide range of temperatures; with excellent low temperature bond. Its tough polyethylene backing offers good abrasion and tear resistance. It is highly conformable, waterproof and resistant to chemical deterioration. Tape has good tear characteristics.
APPLICATIONS:
- Wire identification
- Surface protection
- Seaming and splicing of films
PHYSICAL PROPERTIES:
|
Backing |
4.5 mils (0.114 mm) Low Density Polyethylene Film |
|
Adhesive |
2.5 mils (0.064 mm) Synthetic Rubber |
|
Total Thickness (excludes liner) |
7.0 mils (0.178 mm) |
|
Peel Adhesion |
60 oz/inch |
|
Adhesion to Backing |
35 oz/inch |
|
Tensile Strength |
18 lbs/inch |
|
Elongation |
80% |
|
Minimum Application Temperature |
65°F |
|
Available Colors (4) |
Clear, Black, White & Red |
STORAGE:
Tape should be stored in a cool, dry area at temperatures of up to 75°F.
Alternative to Scapa #135.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
Specifications
- Weight: 30 lb
