Product Description
9.0mil low density polyethylene (LDPE) film coated on one side with a synthetic rubber adhesive.
FEATURES/BENEFITS:
Its tough polyethylene backing offers good abrasion and tear resistance. The adhesive system remains permanently tacky and bonds well to most surfaces over a wide range of temperatures. It is highly conformable, waterproof and resistant to chemical deterioration.
APPLICATIONS:
- Used for polyethylene splicing or seaming, for patching/repairing poly sheeting, surface protection / electroplate masking, wire identification, and packaging; in construction applications, such as stucco fabrication; and in the boating and RV industries.
- For most applications where a low thread count polyethylene coated cloth tape is being used.
PHYSICAL PROPERTIES:
|
Backing |
Low Density Polyethylene Film (LDPE) |
|
Adhesive |
3.5 mil Synthetic Rubber |
|
Total Thickness |
9.0 mil (0.229mm) |
|
Peel Adhesion |
85 oz/inch |
|
Adhesion to Backing |
35 oz/inch |
|
Tensile Strength |
22 lb/inch |
|
Elongation |
100% |
|
Temperature Resistance |
32°F to 160°F |
|
Available Color (7) |
Clear, Black, White, Green, Red, Blue and Yellow |
STORAGE:
Tape should be stored in a cool, dry area at temperatures of 60°F to 70°F.
Alternative to 3M #481, Berry Plastics #827; Scapa #136; PATCO #5400; Shurtape #VP555; Cantech #278.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
Specifications
- Weight: 30 lb
